Laser Crystals Available for Immediate Delivery

Nd:Yag Stock

	Length	Diameter	Doping	Finish	Quantity Available
	115 mm	12.7 mm	0.7 % Nd	AR/AR, F/F	5 Request Quote
	110 mm	6 mm x 8 mm slab	1.1% Nd	AR/AR, wedge angle 59 °	1 Request Quote
	80 mm	10 mm	1.2% Nd	AR/AR, F/F	3 Request Quote
	150 mm	8 mm	1.1% Nd	AR/AR, F/F	2 Request Quote

Sapphire Wafer Stock

	Reference	Thickness	Diameter	Orientation	Polished	Quantity Available
	SWA5	0.9 mm	3 inches (second rate condition)	C-Plane, ±0.25 ° off	As-Cut	3750 Request Quote
	SWA6	0.9 mm	3 inches ( condition variable)	C-Plane, ±0.25 ° off	As-Cut	4000 Request Quote

• AR/AR means that the rod or slab has an AR (Anti Reflective) coating at both ends.
• F/F indicates that the ends of the rod or slab are flat, rather than having a wedge angle.
• FOM is the figure of merit for the Ti:Sapphire material. Figure of merit is measured as the ratio of alpha\820nm : alpha\514nm, Alpha being the absorption measured in cm-1
• C-plane indicates the orientation the sapphire wafer, alternatively designated (0001)
SSP means single side polished, DSP, double sided polished, As-cut means not polished